ZYCOO 4FXO U50 U100 4 FXO module with 4 FXO interface
The Analog Trunk FXO is an interface that connects to a trunk line, like the one from yourservice provider. It receives ringing voltage and battery from FXS devices. ZYCOO 4FXO U50 U100 4 FXO module with 4 FXO interface interfaces are used to connect your PBX to the PSTN. One FXO channel is required for each line you receive from your telco.
The Analog Trunk FXO provides connectivity to analog central office loop start trunk lineanalog interfaces. And it can be combined with BRI, PRI, GSM module.Typically, a phone is connected to a loop start line from the Telco and is, by default, in an on-hook state. When the phone goes off-hook, the phone completes the line circuit and currentflows through the line. The Telco provides an audible dial tone to the phone and accepts dual-tone multi-frequency (DTMF) digits from the caller.
The Central Office Interface Circuit (COIC) is the heart of the loop start Analog interface, and takes the place of a telephone when connecting to the Telco.
-Voltage detection threshold is software-selectable
The 4FXO module supports CooVox-U50/ CooVox-U100 IP Phone System with 4RJ11 ports for PSTN line connection. Each port has
one LED(Light-Emitting Diodes).
The Red LED indicates port status:
>Solid Red= Module loading successful
>Blink Red= Channel Ringing
If the LED is off , the FXO module is loading failure
All four ports on zycoo 4FXO module bracket are 6P4C RJ11 ports. The pin assignments are indentified in T abel 1.
T able 1: RJ11 T elco Port Connector
Environmental Operation Information
Temperature: 0°C ~ 40°C
Humidity: 5% ~ 95% Non-Condensing
76 x 116 mm
CE / FCC / RoHS