Ubiquiti F-POE Fiber PoE

Ubiquiti F-POE Fiber PoE

• Power over Ethernet injector/source
• Models support PoE, PoE+, HPoE (60W) and IEEE 802.3bt (60W and 100W)
• Supports 10/100 and 10/100/1000 Ethernet
• Multiple port configurations available
• Supports fixed-fiber connectors or SFP transceivers
• Available in AC or DC models

Buy this Ubiquiti Products from our Dayari Technologies shop in Nairobi Kenya at discounted prices today.

Ubiquiti F-POE Fiber PoE

2DatasheetOvercome PoE limitations with the FiberPoE™. The FiberPoE is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device. Deployments with the FiberPoE also provide significant EMI and ESD protection over typical PoE installations.Separate Data and Power TransportPoE is ideal for indoor or short-run installations. However, for outdoor, long-distance installations, PoE becomes vulnerable to EMI and is limited to 100 meters with correlated power loss. With the FiberPoE, data and power are transported on separate cables to greatly improve data integrity and enable much longer cable runs.The FiberPoE provides Gigabit bi-directional data transport between twisted-pair Ethernet cable and fiber optic cable, and injects DC power to the Ethernet cable for passive PoE. Use one FiberPoE device as an Fiber‑to‑Ethernet Converter, or a pair of FiberPoE devices to create a Fiber Bridge.Fiber Optic Data TransportUsing fiber optic cable for data transport significantly reduces electrostatic discharge (ESD) failures and electromagnetic interference (EMI). Data integrity is also sustained in runs beyond 100 meters, the limit of Ethernet over twisted-pair cable.The FiberPoE supports a 1G SFP module and 24V or 50V power from a DC power cable or PoE cable.

f‑poe‑g2,

f-poe-g2 manual,

unifi fiber to Ethernet,

ubiquiti fiber,

ubiquiti fiber gen2,

fiber poe switch,

power over fiber,

uf-sm-1g-s,