FAAC 844 SLIDING GATE MOTOR
FAAC 844 SLIDING GATE MOTOR, Buy Centurion Sliding Gate Motors from our Dayari Technologies shop in Nairobi Kenya at discounted prices today
FOR SLIDING GATES UP TO 2200KG
- Ideal for demanding applications
• Electronic equipment can be fitted internally or remotely, allowing maximum flexibility during installation
• Adjustable torque settings
• Reliability and long life due to the internal mechanical components being immersed in a perpetual oil bath
• Models are available for rack and pinion or chain drive.
Buy these Centurion Sliding Gate Motors from our Dayari Technologies shop in Nairobi Kenya at discounted prices today.
FAAC 844 SLIDING GATE MOTOR
|844 R 3PH
|Power supply voltage
|380-415V~ 3 50/60 Hz
|Three-phase with four poles
|62 Nm (*)
|Max. expressed force
|2500 N (Z12) – 1900 N (Z16) – 1500 N (Z20) (*)
|Max. leaf width
|40 m (Z16) – 50 m (Z20)
|Speed adjustment and motor control
|Inductive with metal sheet
|Twin-disk clutch in oil-bath
|Operating ambient temperature
|-20°C ÷ +55°C
|Type of oil
|FAAC HP OIL
|275 x 191 x 387 mm
|Max. leaf weight
|2,200 Kg (Z12) – 1,600 Kg (Z16)
- Ideal for commerical and industrial applications
- Anti-crushing safety
- As the gearmotor is non reversing, no electric locks need to be installed
- In the event of a power cut, the key-operated release device makes it possible to open and close the gate manually
- Twin-disk clutch in oil-bath
- Inductive or magnetic limit switch (according to model)
INTERNAL CONTROL BOARD OPTION
The control board can be installed internally for convenience or remotely and the motor features the special twin-disk anti-crushing clutch, in an oil bath, enables thrust adjustment between 0 – 110daN.
As the gear motor is non-reversing, you do not require extra electric locks as the motors are locked when not running and in the event of a power cut, the customised release key means you can open the gates manually.
LED DISPLAY PROGRAMMING
Using a simple 3 button programming system on an LED display the installation and programmability is easy including pedestrian part opening and thrust settings.
Most importantly, the internal mechanical components are immersed in a constant oil bath and are housed in a high resistance pressure cast aluminium body which ensures a long life with little maintenance required.
WHAT’S IN THE BOX
- 1x 844 Motor
- 1x Installation bracketry
- 1x RF receiver Module
- 2x XT2 2 Channel remote controls
- 1x Manual Release Key
- 1x 578D Control board
- 1x Pair of SAFEBEAM photocells
Slide Gate Opener
The FAAC 844 (109902) Compact Slide Gate Opener is available in a rack and pinion or a chain model. The operator comes as a package containing the drive unit and electronic control panel. All external reversing devices and other accessories must be ordered separately.
The electronic control panel installed in the cover of the 844 Operator is a microprocessor-based controller that accepts a full range of product accessories and reversing devices to allow the maximum flexibility in designing the gate system.The advanced design of the operator features a small, self-contained unit composed of an electric motor with a built-in clutch and a reduction gear box, both housed in a die-cast aluminum casing. The motor drives the rack or chain to slide the gate. An adjustable friction clutch is located on the input side of the gear box so that when torque exceeds a preset value, the drive torque on the output shaft remains at a constant level. The holding power of the gear mechanism ensures that the gate stays perfectly shut. There is no need to fit an additional lock on the gate.
The electric motor, two-disc clutch, and reduction gear are completely immersed in oil that lubricates the moving parts and also dissipates heat generated during operation. The heat is dissipated through the outer casing of black anodized aluminum. The Manual Release mechanism, a key- and lever operated device, allows you to open or close the gate by hand whenever the need arises. The Manual Release mechanism is useful, for example, when the electrical power goes out and you want to open or close the gate. A limit switch assembly stops the drive motor when the limit switch plates mounted on the rack or chain are sensed. The limit switch is inductive and watertight to increase its reliability and functionality. The adjustable electronic braking system insures that the gate stops exactly where and when required.
faac 844 er z16 datasheet,
faac 844 price,
faac gate motor price,