Dlink DMC-F15SC 100Base-TX to 100Base-FX SC Single-mode Media Converter (15km)

Dlink DMC-F15SC 100Base-TX to 100Base-FX SC Single-mode Media Converter (15km)

General features:

Max. Forwarding Rate

• 10 M: 14, 880 pps
• 100 M: 148,800 pps

Forwarding mode

• Cut-Through

Packet Buffer Memory

• 128 Kbits

Switching Capacity

• 2 Gbps

LAN

• 1 x 10/100 Mbps port
• IEEE 802.3u
• IEEE 802.3x
• Auto-Negotiation for each port
• Half/Full-Duplex operation at 10/100 Mbps
• Back pressure at Half-Duplex operation
• Auto MDI/MDIX
• Wire speed reception and transmission

Buy this D-Link Converters from our Dayari Technologies shop in Nairobi Kenya at discounted prices today.

Dlink DMC-F15SC 100Base-TX to 100Base-FX SC Single-mode Media Converter (15km)

D-Link’s Standalone Media Converters turn an Ethernet connection into fiber, allowing for ultra-fast long distance connections. Installation of a Standalone Media Converter is simple, and allows you to tap into fiber speeds with ease. Instead of requiring an investment in an entire chassis, the standalone series is able to provide the same high-quality conversion on a unit-by-unit basis. Get Dlink DMC-F15SC 100Base-TX to 100Base-FX SC Single-mode Media Converter (15km) from our Shop

D-Link’s Standalone Media Converters turn an Ethernet connection into fiber, allowing for ultra-fast long distance connections. Installation of a Standalone Media Converter is simple, and allows you to tap into fiber speeds with ease. Instead of requiring an investment in an entire chassis, the standalone series is able to provide the same high-quality conversion on a unit-by-unit basis. The standalone nature of these means that you can use save space and cut costs while still extending your network over long distances up to 60 km on a fiber-optic line. In addition to all models supporting 10/100 Mbps Half/Full-duplex, the DMC-G01LC also allows for 1000 Mbps Full-Duplexing, letting you truly maximize your network’s potential.

Extend Your Network

Fiber-optic speeds are critical to success, but twisted-pair cabling can only go so far. Using D-Link’s converters you can change a twisted-pair Fast Ethernet connection into a single-mode or multi-mode fiber connection that can go much farther. Converters for distances of anywhere from 2 km to 60 km allow you to optimize your selection.

No Wasted Space

Its compact size fits anywhere and doesn’t require an entire rack. Measuring just 70 mm wide by 95 mm long by 25 mm high, the total volume of one unit is just 0.166 liters. This allows for convenient installation wherever it is needed, especially in limited space  environments such as telecommunication cabinets or a distribution box.

Plug & Play

The media converters offered by D-Link include several industry-standard technologies that make them easy to operate, like 802.3u/x/ab1. Auto-MDI/MDIX and Auto-Negotiation make sure
your cable connection functions at the highest possible speed while remaining compatible. There’s no management software to configure – simply connect the converter.

Specifications

d’link media converter single mode,

d’link media converter fiber to Ethernet,

d-link media converter multimode,

d-link media converter price,

d’link fiber media converter,

d-link gigabit media converter,

d’link media converters,

d-link poe media converter,