Cisco Wireless-N Access Point Power Over Ethernet WAP121
KSh15,000.00 Excl. Tax
Cisco Wireless-N Access Point Power Over Ethernet WAP121
Cisco Wireless-N Access Point Power Over Ethernet WAP121
Operating on the 2.4 GHz frequency and supporting wireless data throughput of up to 300 Mbps, the Cisco Wireless-N Access Point Power Over Ethernet WAP121 with Single Point Setup from Cisco makes it easy to extend the reach of an existing network.
Buy this Cisco Wireless Access Points from our Dayari Technologies shop in Nairobi Kenya at discounted prices today.
Cisco Wireless-N Access Point Power Over Ethernet WAP121
Cisco Wireless-N Access Point Power Over Ethernet WAP121
Operating on the 2.4 GHz frequency and supporting wireless data throughput of up to 300 Mbps, the Cisco Wireless-N Access Point Power Over Ethernet WAP121 with Single Point Setup from Cisco makes it easy to extend the reach of an existing network.
Buy this Cisco Wireless Access Points from our Dayari Technologies shop in Nairobi Kenya at discounted prices today.
Cisco Wireless-N Access Point Power Over Ethernet WAP121
Operating on the 2.4 GHz frequency and supporting wireless data throughput of up to 300 Mbps, the Cisco Wireless-N Access Point Power Over Ethernet WAP121 with Single Point Setup from Cisco makes it easy to extend the reach of an existing network. With a simplified setup process a network administrator can easily deploy multiple access points and with the dedicated configuration wizard the network settings can be easily monitored and managed.
Operating on the 2.4 GHz frequency and supporting 802.11b/g/n wireless networking standards this Cisco access point supports data transfer rates of up to 300 Mbps. Simply attach the WAP121 AP to an existing network via the single Fast Ethernet port and begin distributing up to four separate wireless connections with support for up to 4 SSIDs. Once configured, the wireless connection can be secured using WPA/WPA2/WEP encryption standards along with access control management and rogue access point detection.
Highly secure, high-speed 802.11n wireless networking delivers enhanced throughput and extended range for bandwidth-intensive applications.
Wizard-based setup and configuration enables fast, simple deployment.
Single Point Setup controllerless multi-access point deployment and management technology makes configuration simple.
Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point detection, helps protect sensitive business information.
Support for PoE enables easy installation without expensive additional wiring.
Workgroup Bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network.
Elegant, compact design with internal antennas and versatile mounting kit enables installation on a ceiling, wall, or desktop.
Intelligent QoS prioritizes network traffic to help keep critical network applications running at top performance.
Power-saving sleep mode and port control features help maximize energy efficiency.
Secure guest access enables safe wireless connectivity for visitors.
Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades.
Can be managed remotely using a web browser via the SNMP v3 protocol
Cisco WAP121 Specs
| General | |
| Minimum Requirements | 802.11b, 802.11g, 802.11n wireless adapter with TCP/IP protocol installed per PC Switch/router with PoE support or PoE injector when used with PoE Web-based configuration: Java-enabled web browser |
| Standards | IEEE 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460) |
| Ports | LAN Fast Ethernet auto sensing, DC jack |
| Switch | Power button (on/off) |
| Button | Power (on/off) push button, Reset button |
| Cabling Type | Category 5e or better |
| Antenna | Internal antennas optimized for wall, ceiling, or desktop placement |
| LEDs | Power, WLAN, LAN |
| Operating System | Linux |
| Physical Interface | |
| Ports | 10BASE-T/100BASE-TX Ethernet, 12 VDC power with support for 802.3af PoE |
| Power Supply | External 12 V 0.5 A DC power jack (Energy Star 2.0 compliant with Efficiency Level 5) and 802.3af PoE |
| Button | Power (on/off) push button; Reset button |
| Lock | Slot for Kensington lock |
| LED | Power, Wireless, Ethernet |
| PoE | |
| PoE | 802.3af |
| Peak Power | 6 W |
| Network | |
| Supports | VLAN, 802.1X supplicant, SSID to VLAN mapping, Auto channel selection, Spanning tree, Load balancing |
| Number of VLANs | 1 management VLAN plus 4 VLANs for Service Set ID (SSID) |
| Multiple SSIDs | 4 |
| IPv6 | IPv6 host support IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc |
| Layer 2 Features | 802.1Q-based VLANS, 4 active VLANS plus 1 management VLAN |
| Security | |
| Encryption | WPA/WPA2/WEP & Enterprise authentication |
| Access Control | Management access control list (ACL) plus MAC ACL |
| Secure Management | HTTPS |
| Wi-Fi Protected Setup | Soft WPS, no hardware push button |
| Broadcast System | SSID |
| Detection Functions | Rogue access point |
| Mounting Options | |
| Options | Desktop installation; mounting bracket included for easy ceiling or wall mounting |
| Security | |
| Lock | Kensington lock slot |
| Quality of Service (QoS) | |
| QoS | Wi-Fi Multimedia & Traffic Specification (WMM TSPEC) |
| Performance | |
| Data Rate | Up to 300 Mbps data rate (real-world throughput will vary) |
| User support | Recommended up to 16 connected users, or 10 active users. |
| Configuration | |
| Web User Interface | Built-in web user interface for easy browser-based configuration (HTTP/HTTPS) |
| Management | |
| Setup | Single Point |
| Access Point Management | Maximum per cluster: 4 Active clients per cluster: 40 |
| Management & Protocols | |
| Management Protocols | Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour |
| Event Logging | Event logging |
| Network Diagnostics | Logging and packet capture |
| Web firmware upgrade | Firmware upgradable through web browser, imported/exported configuration file |
| Dynamic Host Configuration Protocol (DHCP) | DHCP client |
| Host | IPv6 |
| Wireless | |
| Frequency | Single-band 2.4 GHz |
| Radio Type | Single radio |
| Modulation Type | OFDM (Orthogonal Frequency Division Multiplexing) |
| Channels | 1 to 13 (depending on country) Channels 1 through 11 (FCC) Channels 1 through 13 (ETSI) |
| Isolation | Wireless isolation between clients |
| Internal Antennas | Internal fixed PIFA antennas |
| Antenna Gain In dBi | 2 dBi each antenna |
| Transmitted Power | 802.11b @ 11 Mbps: 17 dBm 802.11g @ 54 Mbps: 13 dBm 802.11n @ HT20HT40, MCS15: 13 dBm |
| Receiver Sensitivity | 802.11b: 11 Mbps @ -86 dBm 802.11g: 54 Mbps @ -71 dBm 802.11n: 300 Mbps @ -64 dBm |
| Multiple SSIDs | 4 |
| Supports | Wireless Distribution System (WDS), Roaming, Wireless VLAN map, WLAN security |
| WMM | With unscheduled automatic power save and voice profile |
| Access Point Modes | Access Point mode, WDS bridging, Workgroup Bridge mode |
| Environmental | |
| Power | 12 VDC, 0.5 A input, and IEEE802.3af compliant PoE |
| Certifications | FCC class B, CE, IC, Wi-Fi |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Storage Temperature | -4 to 158°F (-20 to 70°C) |
| Operating Humidity | 10 to 85% non-condensing |
| Storage Humidity | 5 to 90% non-condensing |
| Mean Time Between Failures | 531189 hours |
| Physical | |
| Dimensions (W x D x H) | 4.89 x 4.89 x 1.38″ (124.17 x 124.17 x 35.00 mm) |
| Weight | 0.37 lb (0.16 kg) |
| Packaging Info | |
| Package Weight | 1.3 lb |
| Box Dimensions (LxWxH) | 9.7 x 5.8 x 3.2″ |
cisco wave 1 access points,
cisco wap121 wireless-n access point with poe,
wap121 cisco firmware,
cisco systems 802.11ac wireless access point,
access point setup wizard,
cisco wap121 quick start guide,
cisco wap121 dhcp server,
wap121 user guide,
Be the first to review “Cisco Wireless-N Access Point Power Over Ethernet WAP121”
Related products
D-link Switch
Reviews
There are no reviews yet.