CENTURION D10 MOTOR KENYA

CENTURION D10 MOTOR KENYA,The centurion d10 motor is Capable of handling sliding gates up to two tones in mass, and in arduous operating conditions.

This is the best choice for commercial and industrial applications, the A10 motor however is the most suitable for industrial sliding gate purposes because it has a powerful motor but its is slightly expensive.

The CENTURION A10 uses a three-phase AC motor and electronic inverter to provide ultra-rapid opening and closing of the gate.

The speed can be increased from 16 up to 30 meters per minute and is adjustable between opening and closing.

The inverter’s added advantage of total speed control makes for the fastest, smoothest starting and stopping of any sliding gate on the market in addition to extending the long term reliability of the system.

Combining the running characteristics of the three-phase motor and the efficiency of the inverter, the A10 continues to run cool even in high duty applications.

CENTURION D10 MOTOR and SLIDING GATE AUTOMATION.

Buy the D10 INDUSTRIAL SLIDING GATE MOTOR from our Nairobi shop and have our qualified technician install it for you at affordable price.

We are the leading suppliers and installer of quality centurion automation gate solutions in Nairobi Kenya.

The D10 sliding gate motor uses a battery-driven high-torque 24V DC motor, coupled to a robust gearbox to provide an access automation system that is quick, powerful and battery backed up – perfect for industrial and commercial applications where heavy gates are installed.

it comes with quality LCD controller that can monitor diagnostics and set any function at the touch of a button and you’ll understand why you won’t need another gate motor for a long time.

The MAIN FEATURES of the centurion d10 motor are as follows:

• Battery backup
• Intelligent speed control
• High duty cycle capability
• Smooth acceleration and deceleration
• Multiple operating features, including Intruder-detection Alarm Modes (a world first)
• Exceptionally easy system setup via LCD user interface
• Onboard CENTURION code-hopping multichannel receiver with selective add and delete
• Integrated Chrono-Guard timer functionality (a world first)
• Be alerted of gate activity via SMS or push notification by connecting a CENTURION GSM device

D10 TECHNICAL DATA:

This gate motor Can operate off a solar supply, consult Centurion Systems for assistance. – Based on a pull force of less than 50% of rated. – 2 x 7Ah battery (can be upgraded for longer power failure autonomy).  – Based on 25°c ambient temperature and unit not in direct sunlight.

Photon, Infrared Gate Safety Beams with Wireless Technology.

it is also possible to integrate it with the photon ii for higher security capability. it comes with the latest and the best infrared gate safety beams that comes with wireless technology

Safety has never been so quick and easy – thanks to wireless technology! Introducing CENTURION’s Photon II infrared gate safety beam with a wireless transmitter.

Photon II makes short work of achieving a safe automation system for even the most challenging of installations.

With a wireless transmitter there’s no need to tunnel under the driveway. Simply align, attach and you’re away!

The MAIN FEATURES of the beam transmitter are as follows.

• The transmitter is wireless and battery-operated saving time and money.
• Two-year battery life using two AA Alkaline batteries (included).
• Thirty-meter operating range – ideal for almost any entrance gate.
• Fully ant-proof and weather-resistant enclosure for greater reliability.
• Transmitter provides audible feedback for easy setup and battery-low indication.
• Low power consumption throughout the system for greater efficiency.
• Installer Mode with audible feedback makes alignment a dream.
• Elegant slim-line construction – only 50mm wide.
• Compatible with Intruder-detection Alarms for enhanced perimeter security3.

PHOTON INFRARED GATE SAFETY BEAMS WITH WIRELESS TECHNOLOGY TECHNICAL DATA:

KEYLESS HIGH SECURITY.

SMARTGUARD, High-Security Keyless Access Control.

SMARTGUARD – HARD-WIRED ACCESS CONTROL KEYPAD

The SMARTGUARD keypad can accommodate up to 1000 unique PIN codes with any user-defined length from one to ten digits.

There are three separate outputs, each configurable to either latching or non-latching. Such functionality caters for many different scenarios for example, a motorized gate entrance may be opened fully using one code.

It  activates  the pedestrian opening using another, and switching on the house alarm using a third. User codes can also be selectively deleted without affecting other codes stored in the memory. The keypad also boasts a “downcounter” allowing select codes to have a limited number of uses.

This is ideal for granting single occasion access, for example to an armed response company with the code deleting itself after use.

The addition of the CENTURION SmartSwitch maximises security and ensures that even with the keypad mounted outside the property, it cannot be “hotwired” and the integrity of the site jeopardised.

The same memory module used on the SupaNOVA may also be used on the SMARTGUARD access control keypad, allowing all the settings and codes to be backed up and restored in seconds.

CENTURION D10 MOTOR and SLIDING GATE AUTOMATION.

 MAIN FEATURES:

• SMARTGUARD for hard-wired installations.
• 1000 unique codes using one to ten digits.
• Three channel output.
• Selectively add and delete user codes.
• Backup Memory Module.
• Limited uses counter.
• Fully weatherproof with backlit keypad.
• SmartSwitch for tamper-proof outputs.

 WiZo-Link

WiZo-Link uses radio technology to create what is known as a mesh network. This may be described as a layer of radio communications (think of these as roads) where every device (WiZo-Link) is continually acting as a repeater for all the signals (the “traffic” or “vehicles” travelling on the “road”) in the network, even if these devices are not associated with that WiZo-Link.

Make anything wireless thanks to mesh network technology

The WiZo-Link’s value proposition is a simple one: to make your life easier by pulling the plug on wires.
Hard-wired connections have the following limitations.

They are:
• Costly
• Unsightly
• Time-consuming
• Fixed and inflexible

WiZo-Link takes all the hassle out of creating a fully-connected home by forming a wireless mesh network that can be effortlessly scaled and expanded according to your requirements.

Each WiZo-Link becomes a “node” in the network and talks to other nodes to create a sort of intelligent and responsive super-highway carrying signals over great distances. If the environment changes, the network simply finds a suitable detour to ensure that you remain connected.

Extendable range with redundancy
With WiZo-Link, the range is no longer an issue. Unlike traditional starred networks, adding more devices actually strengthens the network since every device acts as a signal repeater.

In addition, thanks to a system design that incorporates redundancy, the reliability of the network is guaranteed even if one of the devices stops working1. The signal will simply be “picked up” by the nearest working device.
1.Assumes more than two nodes

Not reliant on line-of-sight
Traditional networks may be compromised by the presence of buildings, trees and other structures obstructing the transmission path.

Mesh networks like the one created by WiZo-Link automatically adapt to the environment by finding the optimal route for wireless communication.

WiZo-Link is a bidirectional device, meaning that each device in the network acts as both transmitter and receiver, further strengthening the network and making for a truly robust wireless infrastructure that isn’t reliant on line-of-site transmission.

Eliminates wired civils
With WiZo-Link, there is no need to deface your property and spend large amounts of money on time-consuming, unreliable and inflexible wired connections.

A virtually unlimited list of possible applications
WiZo-Link enables you to wirelessly control and activate lights, electric gates, geysers, pool pumps, irrigation systems, air conditioners and a plethora of other electrical appliances. It’s home automation made simple, and wireless!

Control your entire world with a single, centralised GSM unit
Bring your WiZo network to life by adding a CENTURION G-ULTRA GSM unit. All you’ll need is a single, centralised GSM unit to monitor and control all your WiZo-Linked appliances via your mobile phone*.

This is a far more cost-effective solution than installing a GSM unit at every appliance that you’d like to monitor and/or control, and you’ll save a wad of cash on cabling and installation costs, not to mention the convenience of controlling your home from your phone.
*.*Each device that is to be monitored and/or controlled requires a Master Node in order to facilitate the input/output functionality of the Slave Node(s)

WiZo-Link networks can be grown to almost any size
The beauty of a WiZo-Link network lies in its superior flexibility and customisability. One could, for example, start by switching on a single outside light and gradually add to your network until there is a considerable number of “nodes” in your network, performing a variety of functions.

The CENTURION D10 is one of the best sliding gate motor in the sliding gates automating industry. It comes with the best inbuilt automation capabilities. It uses a battery-driven high-torque 24V DC motor, coupled to a robust gearbox.

This enable it to provide an access automation system that is quick, powerful and battery backed up. This is a perfect solution for industrial and commercial applications where heavy gate automation is needed.

Easy to set up and easy on the eye, the CENTURION D10 has everything you’d expect from CENTURION.

Add an LCD controller that can monitor diagnostics and set any function at the touch of a button and you’ll understand why you won’t need another gate motor for a long time.

CENTURION D10 MOTOR and SLIDING GATE AUTOMATION.

 FAQ

 WHY USE DC MOTOR OR BATTERY OPERATED MOTOR ON A GATE OPENER?

1. A DC motor has excellent starting torque (much greater than an AC motor). This high starting torque is ideal to overcome the initial friction of getting the gate moving and accelerating the gate up to speed.
2. The speed of a DC motor is easily controlled and thus a gate can be softly ramped up to speed and slowed down as required (see the D5 motor).
3. The DC motor is more efficient than comparable AC motors thus virtually eliminating shutdown due to over – temperature.
4. With a battery the gate can be operated a limited number of times in total power failure conditions (actual number of operations depends on the capacity of the battery).
5. In areas of no AC mains power a solar panel can be used to charge a battery. Typical applications are farming communities, or high security sites located on mountainous areas, etc.

 WHAT IS THE BIGGEST GATE THAT CAN BE OPERATED WITH THE D5-EVO / D5 / D3 / A5?

The limitations for the A5/D5 are the following:

1. The starting pull force must be less than 25kgF for the D3, 60kgF for the D5 and less that 22gkF for the A5.
2. The mass of the gate must be less than 300kg for the D3 and less than 500kg for the D5 and A5 motors.

WHY DOES THE A5/D5 SOMETIMES SEEM TO LOSE ITS ENDPOINT SETTING? (REFERS ONLY TO VERSION 1 TYPE D5 OR A5 MOTORS)

The most likely cause is loss of mesh between the rack and pinion. Because of the internal limit switch mechanism (DOSS) it is vital to maintain the mesh between the rack and the pinion.

MY A5 MOTOR STOPS INTERMITTENTLY FOR NO APPARENT REASON. SOMETIMES IT STOPS DURING OPENING AND SOMETIMES DURING CLOSING.

The problem may be caused by a loose connection in the controller 12V DC power supply circuit. What happens is that the controller momentarily loses its 12V DC supply (it is often a drop in voltage that occurs so quickly that it is not possible to measure it with a standard volt meter) and the P/C microprocessor on the controller resets.

It is very easy to see if this is the problem because the STATUS LED flashes 5 times as the motor stops, and all the monitoring LED’s (STATUS, L1 AND L2) will be switched off.

 How many times can I open my D5-Evo / D5 / D3 operated gate with mains power failure?

This depends on the weight of the gate, the rolling friction (or pull force applied), the length of the gate and the size of the battery. As a rough guide a typical gate of approximately 4-5 metres, on round rail with good quality wheel bearings, using a 7A/H battery, will open and close approximately 15 times.

 WHEN SETTING MY GATE LIMITS, ‘OPEN’ AND ‘CLOSE’ WORK FINE, BUT I CAN’T SET MY PEDESTRIAN OPENING POINT? (THIS APPLIES ONLY TO THE OLDER VERSION 1 D5 AND A5 MOTORS)

 Ensure that your DOSS has been set in the correct direction. Is the rack mounted UNDERNEATH the pinion? If so, DOSS direction is reversed, as well as motor wires.

 WHEN THE GATE CLOSES IT SEEMS TO HIT AN OBSTRUCTION AND THEN RE-OPEN. THIS SOMETIMES HAPPENS 3 TIMES IN A ROW.

Something is either restricting the gate when it reaches the closed position activating the    sensitivity mechanism to reopen the gate or the sensitivity is just set too high.

• Put the gate into manual mode and push the gate closed but push the gate very slowly. You want to try detecting any changes in the resistance to the movement of the gate when it reaches the closed position. If you notice that you must push harder at the end or something is catching the gate, try and identify what it is and resolve this.
• Check that when the gate closes, it moves smoothly into its closed catch bracket – make sure that even if the gate wobbles slightly from side to side it is not going to hit the catch. Once again if this is the case try and open up the catch.
• Lastly reduce the sensitivity of the operator. Visit our website – Centurion Systems. Read from page 27 of the manual. You must programme at MENU LEVEL 7 – 3 flashes of the STATUS LED. (this will give you LOW sensitivity)

• WHAT IS CONDOMINIUM MODE?

This is a mode of operation which is used typically in townhouse complexes or business sites where there could be many people all trying to control the operation of a gate at the same time. With Condominium mode selected all trigger inputs will have the effect of opening a closed, or closing gate, but will be ignored if the gate which is already opening. This implies that it is not possible to give a trigger to close a gate which is open. The controller automatically installs “auto close” and it is the auto close timer which causes the gate to close. The auto close time can be adjusted from 1 to 255 seconds. (In this mode it is not possible to make use of the auto close override feature of the Centurion controllers). Any trigger signals given during the period when the gate is in fully open position have the effect of restarting the auto close countdown.

 WHAT IS PCM?

P.C.M. is an abbreviation for Positive Close Mode. It is a mode which can be selected to close a gate up against an end stop. In this mode the gate will slow down normally; then continue to run until it strikes a physical end stop. If there is no end stop the gate will continue to run for approximately 350mm and then stop. Its main use is to ensure that a gate is always closed to an exact position so that, say, a magnetic limit switch will make reliable contact.

WARNING: Care must be exercised in this mode because the gate will not reverse from the instant that the gate starts its slow down ramp till it is fully closed. Thus any object in this region of the gate travel will be trapped. It is highly recommended that infra red beams are fitted if this mode is selected. The IR beams are effective up to the point that the gate stops.

WHAT IS PIRAC MODE?

PIRAC is an abbreviation for Passive Infra Red Auto Close. It is a mode of operation which will cause the gate to close immediately the infra red beam is cleared after an object has entered the beam. Any trigger to the control card will cause a closed or closing gate to open. If already opening, the trigger signal is ignored. If the gate is opened, but the beam is not broken, then the gate will immediately start closing when it reaches its programmed, fully open end point. It is thus a high security mode.

CAN A BATTERY LARGER THAN 7A/H BE USED ON CENTURION BATTERY OPERATED GATE SYSTEMS?

Yes. The larger the battery the more times the gate can be operated when a power failure occurs. For high volume applications it may be necessary to change the battery charger to ensure that the total energy into the battery exceeds the total energy drawn out of the battery over a long period of time.

WHEN I GO INTO SET-UP MODE, L1 STARTS FLASHING ONCE, THEN TWICE, THEN THREE TIMES ETC.

Is the TRG LED illuminated? If so, find and remove the short circuit.

 HOW CAN I TELL IF THE ORIGIN SUBSYSTEM IS WORKING PROPERLY?

In set-up mode:

• The “status” led should be on if the origin marker is right of the unit.
• The “status” led should be off if the origin marker is left of the unit.

In operational mode:

• LED L1 should be off if the origin marker is on the “closed” side of the sensor.
• LED L1 should be on if the origin marker is on the “open” side of the sensor.

 ORIGIN SYSTEM TROUBLESHOOTING.

Problem 1. Unit fails to complete set-up cycle.
Check that the origin subsystem is working (refer Q3 set-up mode). If not:-

• Check the origin marker is mounted the correct way around, (refer to page 13 of the installation manual).
• Check the origin marker is mounted the correct distance (>500mm) along the rack from the sensor, (refer to page 13 of the installation manual).
• Reduce gap (refer Q2).
• Check that the steel magnetic shields are fitted D3/A5 only (D5 does not utilise).
• Check the harness connections, the middle white plug should be connected to the DOSS.
• Check battery voltage (D3/D5 models only).

Problem 2. Unit rams an end stop.

• Check all points as per “problem 1” above.
• Check that the steel magnetic shields are fitted D3/A5 only. (D5 does not utilise)
• Remove anti theft cage (if fitted) and repeat set-up procedure.l
• Check that the origin marker is secure.
• Check that the gearbox mounting is secure.

My gate opens, but then won’t close.

How do I secure the mounting bracket for steel rack installations?

My gate won’t operate.

What gap is necessary between the origin marker face, and the cover of the unit?

I have set my gate limits successfully, but when I run the gate it slams into the end stops. (This applies only to the older version 1 D5 and A5 motors)

MY GATE OPENS, BUT THEN WON’T CLOSE.

Check that the green IRB LED is on. If not, find out why.

HOW DO I SECURE THE MOUNTING BRACKET FOR STEEL RACK INSTALLATIONS?

It is advisable to use four separate weld points when mounting the bracket to the rack.

MY GATE WON’T OPERATE.

Are the green IRB and LCK LED’s lit? If not, determine why. When the gate is triggered, does the red TRG led light? If not, determine why. Are any of the red diagnostic LED’s permanently on? If so, determine why.

 WHAT GAP IS NECESSARY BETWEEN THE ORIGIN MARKER FACE, AND THE COVER OF THE UNIT?

5-10 mm is normally acceptable, but in the case of the following installations 2- 4mm is recommended:-

• Installations fitted with steel anti-theft cages.
• Installations with steel posts on the LHS of the unit.
• All A5 installations.

I have set my gate limits successfully, but when I run the gate it slams into the end stops. (This applies only to the older version 1 D5 and A5 motors)

Check your motor direction wires. The first action after setting the limits is to close. If the gate opens, the motor wires must be reversed. Is the rack mounted UNDERNEATH the pinion? If so, DOSS direction and motor wires are reversed.

CENTURION D10 MOTOR and SLIDING GATE AUTOMATION.

CENTURION D10 MOTOR KENYA

d10 gate motor price Nairobi kenya

d10 gate motor wiring diagram

heavy duty gate motors

industrial gate motors for sale

centurion d10 brochure

d10 gate motor programming

centurion d10 gate motor troubleshooting

heavy duty gate motors

gate motor kit for sale

d10 turbo

dc motor for sliding gate

centurion d5 evo gate motor price Nairobi kenya

d10 gate motor price

d10 gate motor programming

centurion d10 gate motor troubleshooting

d10 gate motor price check