FIRE ALARM DETECTION AND ACCESSORIES SYSTEM

FIRE ALARM DETECTION AND ACCESSORIES SYSTEM,Buy fire alarm detection and accessories systems in Nairobi Kenya

Visit our Nairobi based shop and buy quality and affordable fire alarm detection systems as well as accessories.

A fire detection & alarm system is a security setup that comes with a number of devices working together as a unit to detect and warn people in case of danger.

The warning is mainly through visual and audio appliances when smoke, fire, carbon monoxide or other emergencies are present.

Sale!

Fire Alarms and Accessories

Manual Fire Alarm Break Glass

KSh1,950.00 KSh1,499.00
Sale!
KSh4,700.00 KSh3,499.00
Sale!

Fire Alarms and Accessories

security smoke alarm detector

KSh4,700.00 KSh3,800.00
Sale!
KSh6,700.00 KSh3,999.00
Sale!

Fire Alarms and Accessories

Break Glass for Key

KSh4,500.00 KSh4,000.00
Sale!

Fire Alarms and Accessories

Foam security Fire Extinguisher

KSh8,900.00 KSh4,500.00
Sale!

Fire Alarms and Accessories

CO2 Fire Extinguisher 9 Liters

KSh11,500.00 KSh6,999.00
Sale!

Fire Alarms and Accessories

Fire Resistance Cable

KSh12,500.00 KSh10,499.00
Sale!
KSh19,500.00 KSh15,999.00
Sale!
KSh24,500.00 KSh21,999.00
Sale!

Fire Alarms and Accessories

automatic security Fire Panel

KSh28,500.00 KSh23,999.00

Some of these alarms comes with inbuilt functionality that enables them to be activated automatically from smoke detectors, and heat detectors.

There are some that need to be activated via manual fire alarm activation devices such as manual call points or pull stations. Alarms can be either motorized bells or wall mountable sounders or horns.

The following are some of the Fire Alarm Systems and accessories you can get from dayari technologies Nairobi Kenya.

FIRE ALARM DETECTION AND ACCESSORIES SYSTEM

  • Fire alarm panel systems
  • Break glass units for keys
  • Break glass units-Access Control
  • Fire alarm bell with strobe light for alarm sound system
  • Fire blankets
  • Fire extinguishers
  • Manual glass alarm systems

Fire alarm bell with strobe light for alarm sound system

The Fire bell normally rung to give signals in case of a fire incidence. The alarm will sound notifying everyone about the impeding danger. This is a quality hollow bell that is made of metal that makes a ringing sound when struck.

The 433 MHz Wireless Flash Siren Alarm Siren Horn Red Light Strobe Siren for Home Alarm System Security kit is the most used in Nairobi Kenya.

Overview Integrated with wireless strobe siren and transmitter host, this system can apply to not only a wireless strobe siren, but also an independent alarm host.

When any detector in this FIRE ALARM DETECTION AND ACCESSORIES SYSTEM is triggered, the host will alarm will sound immediately with loud sound as well as warning flashing with exclusive blinding light to deter intruders.

The host detectors are in wireless transmission mode and can be installed easily. With humanized design, user can assign arm, disarm, volume adjustment, emergency and help, etc. by wireless remote control only.

User can configure multiple wireless magnetic door contacts, wireless PIR detectors, wireless smoke detectors, wireless gas detectors, wireless carbon monoxide detectors, wireless vibration detectors, wireless infrared fences, wireless infrared and other accessories in need.  

Item Information

1.Compact and fashionable mushroom-shape design

2.Wireless, DIY

3.Smart and adjustable volume with 8 levels (including mute)

4.110dB super loud siren, 4 groups of flashing light

5.EEPROM information protection, information never lost to ensure information security

6.Wireless intelligent study coding, maximum support 30pcs remote control and 50pcs detector

7.Compatible with PT1527 (150K~470K) and PT2262 normal encoding (Resistance 1.5-4.7M)

8.Built-in Ni-Hi rechargeable battery 3.7V/600mAh, Standby 8 hours above

9.AC/DC, twenty-four-hour ordinary guarding without interruption

10.AC 100~240V 

We have the best Generic 12V 60W 5 Sound Car Warning Alarm Police Fire Siren Horn Loud PA Speaker MIC System in dayari technologies shop Nairobi Kenya.

Product details

  • Features:
    A good replacement for your old fog lamps support brackets.
  • Made of high-quality ABS material, durable.
  • Perfectly fits for Ford Fusion/Mondeo 2013-2015.
    Comes in pairs.

    Key Features
  • 5 siren sounds to meet different purposes.
  • Volume adjustable, can be used as a MIC.
  • Universal fit 12V vehicle (Car, Van, Truck, SUV, Motorcycle, Yacht, Bus, etc.).
  • Easy to install with the screws and a 4-hole mounting base.

The box comes with 12V 60W 5 Sound Car Warning Alarm Police Fire Siren Horn Loud PA Speaker MIC System.

FIRE ALARM DETECTION AND ACCESSORIES SYSTEM Supply and Installation Company in Nairobi Kenya

It is an important consideration to Safeguard your home or business premises, as well as their occupants from being razed down with fire.

This can be done by installing quality and reliable Fire Sirens and Flashers from dayari technologies Kenya

The Fire Siren and Flashers makes it particularly easy to alert occupants of a very large and complex building of a fire outbreak, allowing them the opportunity to exit the building in time and to avoid being burned.

This reduces significantly, the number of people who would be trapped in a burning building because the sirens are usually loud and when they go off, everyone knows it’s an emergency situation.

Our Fire Siren and Flashers are of a very high quality yet affordable. They are designed to keep your family and business premises occupants safe.

fire alarm bell with strobe light for Alarm Sound System

call us today and buy the fire alarm bell with strobe light for Alarm Sound System at an affordable price in Kenya.

Features

Fire alarm bell& Strobe siren

SR-A82 Fire Siren/Strobe

Voltage: 24VDC

Current: 100mA

Color: RED COLOR

Power: 112db/30cm

Voltage: 15-30V DC

Size:134X115X48mm

Product Pictures

FIRE ALARM PANEL SYSTEMS

One of the most important components of an alarm system is the control panel. The control panel acts as the nerve center of every quality alarm system in an organization.

 The control panel is developed in such a way that it coordinates input as well as output of signals from peripheral devices such as the smoke detectors among others in fire alarm system.

 Therefore, in the event of an emergency, the smoke detectors will send the signal to the control panel then the alarm panel is developed such that a way that it will send a signal to the siren or the re sounder.  

Then a sound is produced which notifies the people that there may be impending danger and therefore everyone takes precaution.

Due to advancement in technology, there buildings that are equipped with advanced voice evacuation systems such that when the alarm panel sends a signal to the public address system a message is send to everyone within the building of an impending re emergency and the appropriate steps to be taken.

A fire control panel is a component that offers control through a fire alarm or notification system. These sensors redirect information to this control panel that includes
environmental changes that could detect the presence of fire.

buy quality and affordable Control Panels that can be installed in buildings to alert employees of a potential fire outbreak making it easier to quickly evacuate the building.

With its features of showing the exact location of the fire, the panel also supplies electrical energy to operate any associated sensor, control, transmitter, or relay.

They also come in four basic types of panels: coded panels, conventional panels, addressable panels, and multiplex systems
Choose the right fire control panel for your building from us and keep your employees’ safety first.

This conventional panel may be supplied in 1,2,3,4 or 8 zone formats. It fully complies with the requirements of BS5389 part 4. All zones and alarm circuits are monitored for open and short circuit fault conditions with detector removal facility also provided as standard.

 The cabinet will house 2 by 12v2.1AH S.L.A. batteries wired in series which will sustain an 8-zone panel for up to 24hrs.

Features:

– Built in detector removal indication facility.
– From 1-8 zones.
– 4 alarm circuits on 4 – 8 zone panels
– Conforms to the requirements of EN54-2
– User friendly access code
– One – man test facility
– Non- latching zone feature
– Class change input.
– Earth fault monitoring
– Fully – functional repeater available (4 & 8 zone panels only.)
– Removable cable entry Grommets
– User friendly controls
– Surface or semi flash mounting as standard
– Ample termination space
– Flame – resistant polycarbonate enclosure
– Log book and manual supplied
– Complies with EMC and LVD directives.

The Asenware 2 Zone Fire Alarm Control Panel AW-CFP2166-2 is one of the most used control panel in Kenya it costs Ksh 22,000.00

The AW-CFP2166 series conventional fire alarm panel is designed based on EN54 part 2&4 standard.

And it is the central part of conventional fire alarm system, designed for applications requiring smoke detector, bell, manual pull stations, and sprinkler supervision.

Each zone can be disabled by a button. The basic unit offers 1 to 8 zones of initiation, up to 16 zones for larger applications.

Buy quality and affordable Asenware 2 Zone Fire Alarm Control Panel AW-CFP2166-2 from dayari technologies Kenya

Product Features

  • It is modularized design; the panel can expend from 1 zone to 32 zone easily.
  • it has 2 level control mode by a lock
  • it has 24vdc and 5vdc power supply output
  • it has Fault and fire signal output.
  • it has 2 general sounders output
  • each zone has 1 circuit detector input
  • each zone can be disabled by button
  • It has REST button to reset the panel
  • It has SILENCE button to stop BUZZER and SOUNDERS.
  • It has EVACUATE button to start a manual fire alarm immediately.
  • It has an optional GSM module for fire alarm by SMS.
  • It is economic, user-friendly and easy maintenance.
Mains supply voltage 110VAC or 220VAC
Internal power supply 27.2VDC
Total output current limited 500mA @ 240VAC
Batteries (default configuration) 12V2.3AH*2
Number of circuits 2
End of Line device 6.8k Ω,5% tolerance, 0.5-1W (colour code-blue,grey,red,gold)
Call point resistor value 470 to 680 Ω, 0.5 or 1 watt
Number of general circuits 2
Outputs fused AT 600mA
Maximum number of bells @ 50mA of each Sounder output 12
Battery fuse 1.85A resettable fuse
Sounder outputs 400mA F 20mm
Output type NC and NO relay
Maximum current 100mA
Largest acceptable conductor size 2.5mm2
Smallest acceptable conductor size 0.75mm2
Dimensions(mm) 320X231X90
Weight (with batteries) 7kg

BREAK GLASS UNITS-ACCESS CONTROL

These devices are made in such a way that it Requires human intervention to work (break glass unit/ manual break-point) then the sound alarm operates to warn others in the building.

Break glass Terminals Units are broken in case of fire or emergency. Then the break glass will trigger the alarm and the panic button, which in turn opens locked door so that people can run in to safety.

 The Exit Break Glass comes with double terminal wire connectors for independent input and output connector.

Break glass Terminals Units are broken in case of fire or emergency it triggers the alarm and the panic button, which in turn opens locked door so that people can run in to safety.

It comes in the following specs

  • The Break glass Units Can be mount on surfaces
  • Single gang
  • Can be fitted with sounder or buzzer
  • Single pole Break glass
  • Protective cover (MX03)

Because of this when there is an emergency a person will be Requires to work on the break glass unit, the action is applied at the manual break-point this leads to the production of a sound alarm which intern warns any person near the point where the danger has been detected.

The Break Glass in the FIRE ALARM DETECTION AND ACCESSORIES SYSTEM Emergency Door Release Button Switch Control Access Switch is one of the most used devices in Kenya today to alert people in case of an emergency.

Visit our Nairobi shop and buy quality Break Glass Fire Alarm Emergency Door Release Button Switch Control Access Switch at an affordable price.

It comes as follows

  • The alarm button Release Emergency Break Glass helps to save lives in emergency situations.
  • Support Electric Control or Access Control System
  • Made of flame-retardant PC material, very convenient and safe
  • Witnesses only need to break the panel glass of the fire safety alarm button

Break Glass for Key

Break Glass for Key is a specially made device made to store key meant to be used in case of an EMERGENCY. The Break Glass for Key BOX is normally manufactured from durable ABS plastic with a screen-printed break glass cover.

The break glass is developed in such a way that it provides key box secure and visible storage of keys for emergency use The perfect solution where you need to provide a key for emergency.

Plastic Fronted “Break Glass” Key-box

  • Durable ABS plastic construction and screen-printed plastic cover
  • Ideal for glass sensitive environments
  • Keys remain visible and accessible at all times
  • Dimensions (HxWxD): 110x110x35mm

Protect emergency keys with this break glass keybox.

  • Supplied with screen printed glass
  • Manufactured from durable ABS plastic
  • Unique “Snap Fit” design
  • Overall dimensions: 120mm x 33mm
  • Replacement glass and hammer with chain available separately

Break Glass Key Box EE06

The key box is designed to store keys and is best suited in areas where it is essential to have keys in case of an emergency i.e. near emergency exit doors. The key box is made from a durable ABS Plastic with a glass element making it suitable for applications such as schools, offices, etc.

Fixing to a wall:

1. Using the mounting base of the unit, mark out the two fixing holes.

2. Secure the mounting base to the wall using x2 1” x 8 fixings (not supplied). Assemble the deterrent glass and face plate.

3. Once assembled push onto the mounting base until it clicks into place.

To replace the glass:

1. Remove the face plate by locating and pushing two brackets found on either side of the mounting base.

2. Assemble the deterrent glass and face plate.

3. Once assembled push onto the mounting base until it clicks into place.

In a fire or any other kind of emergency situation, the last thing you need is for staff to be unable to get out of the building because they either don’t have or can’t find keys for the nearest exit.

Use of our Quick Access ‘Break Glass’ Emergency Key Box is the perfect option to ensure that staff can quickly access keys and open the door for safe egress.

The key box is highly visible in a bright red color and provides secure but easy-to-access storage of keys for any doors with restricted access.

The key box’s rigid and robust construction from ABS plastic for the casing ensures that staff can easily get to the key in an emergency, but cannot otherwise take the key out of the box without breaking the glass and leaving evidence behind.

The glass on the front of the box is printed with the words ‘BREAK GLASS FOR KEY’, and is constructed from Perspex, which means the box is suitable for schools, swimming pools, and even food preparation areas. The key box measure 110mm across the diameter and is 30mm deep.

We also supply a Hammer and Chain for ‘Break Glass’ Key Holders to allow staff to safely break the glass without injuring themselves. And once your glass has been broken, either by accident or in an emergency, you can replace it with our Spare Printed Glass for the ‘Break Glass’ Emergency Key Box.

You might also want to consider our larger, rectangular Emergency Key Box, which comes with a hammer on a chain for breaking the glass already included, and also has a key hole so that authorized personnel can access the keys inside the box, when needed, without having to break the glass. In addition, we also stock Replacement Glass for the Emergency Key Box.

Additional Information

Brand Homesaver
Description Holder with Printed Glass
Material ABS Plastic & Perspex
Product Description Circular Break Glass Key Box
Size 110 (Dia.) x 30mm (D)
Specifications / Characteristics Printed ‘BREAK GLASS FOR KEY’
Supplied in Single

The STI6720 is the best and also the most used Break security box that is made of glass is designed to hold keys or documents in an accessible place in the event of emergency, whilst deterring theft.

The STI6720 Break security Box allows access to the keys or documents within by simply breaking the glass front cover.

The STI6720 Break Glass Key Box comes with a manufacturer’s lifetime guarantee against breakage of the polycarbonate housing.

FIRE BLANKETS

A fire blanket is a simple fire extinguishing device manufactured in flame proof materials, typically glass wool.

You can buy this device from our shop in Nairobi Kenya. We stock the most affordable FIRE ALARM DETECTION AND ACCESSORIES SYSTEM you can buy in Kenya.

This fire blankets are normally developed to provide additional fire safety to your fire extinguishers mainly in a kitchen or catering environment.

Most commonly this fire blankets are used to extinguish small contained fires such as chip pan fires in a kitchen, paper fires in the office, barbeques and engine compartment fires.

The larger sizes fire blankets can also be used as a body wrap, ideal for children and young adults for safe evacuation. Visit our shop in Nairobi and buy this quality Kenya fire security appliances.

If you are looking to buy fire extinguisher at an affordable price in Kenya. We also have quality fire hose reel price Kenya.

As the name implies the fire blanket once released from its container is opened to its full size and placed over the fire to smother the flames.

Our fire blankets are designed for quick release and deployment and ideally should be sited in view for emergency access, close to the area of fire risk.

 In the home where wall hanging may be obtrusive the blanket can be hung on the inside of a kitchen cupboard door close to the cooking area.

Once deployed over the fire, leave for several minutes until all signs of fire have disappeared. Normally fire blankets are not reusable if the outer sleeve is damaged by the fire allowing the ingress of oxygen.

Dayari technologies Ltd has established itself as the leading supplier of the best environmentally friendly Fire Blankets and FIRE ALARM DETECTION AND ACCESSORIES SYSTEM in Kenya today.

These economy fire blankets are manufactured from the best quality non-flammable woven glass fiber to conveniently help smother small fires.

Fire blankets are safe firefighting devices that are designed to aid in putting out small fires associated with kitchen – such as frying pan, burning cooking oil, or fires common with waste bins and clothing.

Fire blankets are non-flammable and can withstand temperatures way up to 900 degrees and are useful in smothering fires as it prevents any access of oxygen to it.

 They are overly simple for use and application, even by people who have no experience with fire extinguishers.

We also supply larger fire blankets measuring from 1.8m x 1.8m Fire Blanket, this kind fire protection supplies that is ideal for use in laboratory and industrial situations.

More often than not, the larger fire blankets are mounted in vertical quick-release container so that they can be easily pulled out and wrapped round a person or body on fire.

Uses of fire blankets:
Fire blankets are usually used to extinguish small fires in the home, garages, cars, boat or caravan, among many more. They can also be wrapped around a person whose clothes have caught fire.

Ensure you keep safe distance between fire blankets and sources of fire such as stove and gas cylinders, to avoid potential hazard associated with fire outbreak.

As a measure of ensuring complete safety, our fire blankets are packaged in high quality fiberglass that can withstand temperatures up to 500 degrees Celsius.

For the best result, it is recommended that fire blankets should only be used once and then replaced after use.

Also ensure that you only buy fire blanket that carries the KEBS mark of quality and Follow the manufacturer’s instructions. This is what we promise our customers.

At long last, Kenyans can now buy the widest range and size of best quality fire blankets from the best-known manufacturers at the fairest price from dayari technologies Kenya. We are the solution to the management of small fires in Kenya by using our quality FIRE ALARM DETECTION AND ACCESSORIES SYSTEM .

When you buy the fire blanket measuring about 1.8m x 1.8m fire blanket made from weaved twill cloth is contained in a wipeable rigid PVC outer cover which has wall mounting capabilities and fast release pull straps you have a means of protection in the event of fire tragedy.

The fire blanket measuring Size 1.8m x 1.8m (6ft x 6ft approx.). which is normally Suitable for a wide range of applications in offices, commercial kitchens, boats, and workshops can be found in dayari technologies Kenya at affordable prices.

A fire blanket is a safety device designed to extinguish small fires. It consists of a sheet of fire-retardant material which is placed over fires in order to smoothen it.

Fire blankets, along with fire extinguishers, are fire safety items that can be useful in case of a fire. These non-flammable blankets are helpful in temperatures up to 900 degrees and are useful in smothering fires by not allowing any oxygen to the fire.

Due to its simplicity, a fire blanket may be more helpful for someone who is inexperienced with fire extinguishers. Order this Item Now Online on dayari technologies Kenya and have it Delivered Straight to your Doorstep.

Fire Blankets designed for smothering and extinguishing fires in homes, kitchens, schools, hospitals, laboratories, offices and factories.

A fire blanket can also be wrapped around a person on fire.  Most Fire Blanket measure about 1.8m x 1.8m

Buy quality Fire Blanket 1.8m x 1.8m from dayari technologies Security shop at an affordable price

It comes with the following features

  • Easy pull-down tags to release blanket.
  • Fire-resistant glass fiber material.
  • Suitable for use on small cooking oil fires & clothing fires.
  • Size (m): 1.8 x 1.8 and 1.2m* 1.2m.
  • Sales Unit: Each

There are normally two sizes of Fire Blanket 1.2m by 1.2m and the other that measures about 1.8m*1.8m you can buy them at very affordable prices in Nairobi Kenya.

The Fire Blanket that measures 1.2m by 1.2m is Ideal for kitchen and other fire places, you can buy it at an affordable price of 2500 Ksh.

Fire Blanket measuring 1.8m by 1.8m is ideal for Hotels, Schools, Industries, Bakeries and other large fire sources the cost of this blanket 3500 Ksh.

FIRE EXTINGUISHERS

dayari technologies is one of the leading fire extinguisher suppliers in Kenya we deal with all type of fire extinguishers supply, installation, training and servicing of Fire extinguishers in Nairobi.

We have over the years collaborated with our partners to become a supplier of different types of fire extinguishers in Kenya. 

These partnerships we have has brought reduced the cost of Fire extinguishers in Kenya considerably compared to those of other fire extinguisher suppliers in Nairobi.

We service and refill fire extinguishers at affordable prices and this has made us one of the best fire extinguishers companies in Kenya.

All fires are classified as A, B, C, D, E and F. The fire extinguishing equipment for these fires are clearly labeled with the class of fire rating.

Fire extinguishers also have a color code for easy identification to clients and fire companies in Kenya.

If you are looking for fire extinguishers company in Nairobi and where to buy fire extinguishers in Nairobi at fair price, dayari technologies supplies, refills, installs and maintains a wide range of Fire Extinguishers from reputable manufacturers.

As one of the best fire extinguisher companies in Kenya, our qualified staff will advise you on the best fire extinguishers for your specific needs.

They will also advice on requirement of Heat and smoke detectors and other fire equipment.

As a leading Firefighting Equipment Supplier in Kenya and a major Fire extinguisher dealer in Kenya, we serve clients in Thika, Meru, Nairobi, Kisumu, Mombasa, Eldoret, Kisii, Nakuru, Naivasha, Nanyuki, Kericho,Namanga,Busia and other major towns.

Fire Extinguisher and FIRE ALARM DETECTION AND ACCESSORIES SYSTEM Dealers in Kenya

Firefighting equipment in Kenya – Powder fire extinguishers may be used on fires which involve electrical equipment and flammable liquids and solids. They also cover flammable gasses. They are referred to as multipurpose extinguishers as they cover different types of fire risks.

The carbon dioxide (co2) extinguisher is the best type of extinguisher for controlling electrical equipment fires. They work by depleting the oxygen needed for a fire to continue burning. They are also commonly used for flammable liquid fires like oil and petrol.

The water fire extinguisher is still one of the most useful and cost-effective ways to put out free-burning materials such as paper, wood and fabrics.

Typical applications can be found in Hospitals, Supermarkets, Hotels, Public places, Restaurants, Industrial units and many others.

what are the 4 types of fire extinguishers? the main fire extinguishers mostly used in Kenya are as follows, carbon dioxide fire extinguishers, Foam fire extinguishers, Dry powder fire extinguishers, Wet chemical fire extinguisher, Clean Agent Fire Extinguishers, Mobile trolley units

Carbon Dioxide Fire Extinguishers

The carbon dioxide fire extinguishers are mostly Ideal for Electrical Fire Risks.

This is because it is normally harmless to electrical equipment and so is ideal for offices and workshops.

Typical applications can be found in Hospitals, Supermarkets, Hotels, Restaurants, Paint shops, Clothing industries, Industrial units, Offices, Fast Food Chains etc.

Foam fire extinguishers

Foam Fire Extinguishers provide a fast, powerful means of tackling flammable liquids.

The foam forms a seal over the surface to prevent re-ignition.

Ideal for multi-risk usage and safe to use in close proximity to electrical equipment.

Typical applications can be found in Hospitals, Supermarkets, Hotels, Restaurants, Paint shops, Clothing industries, Industrial units, Offices etc.

Dry powder fire extinguishers

Dry Powder is a highly versatile medium for tackling most types of fires.

Extremely effective with fast flame knock down on flammable liquids and gases.

Typical applications can be found in garages and workshops or where flammables such as liquid gases and heating oils are store.

Wet chemical fire extinguisher

An extremely effective fire extinguisher designed specifically for fires involving cooking oils and fat.

The chemical knocks out the flames, cools the burning oil and seals the surface preventing re-ignition.

The fire extinguisher is easy to use producing a gentle but highly effective spay which helps prevent hot oil splashing on the user (Suitable for Fat Fryers).

Typical applications can be found in Fish & Chip shops, Fast Food chains and Commercial Kitchens.

  • Class F Fire Extinguisher (Kitchen fires) with Class A fire rating
  • Complies with dielectric test of BS EN3-7:2004, Clause 9
  • Wet chemical process seals the surface of burning oil to prevent re-ignition
  • Cylinder, lance and nozzle constructed from high quality stainless steel
  • Unique hose swivel joint for ease of direction of discharge

Clean Agent Fire Extinguishers were developed as an environmentally acceptable alternative to Halon.

These Fire Extinguishers and all FIRE ALARM DETECTION AND ACCESSORIES SYSTEM are extremely effective in smothering fires without damaging delicate electronic equipment or sensitive goods and leaves no residue.

  • Clean Agent “Drop In” Halon Replacement
  • Zero Ozone Depletion
  • Safe for use on Electrical Hazards
  • Suitable for Class B & C fire classification
  • Ideal for boats, Engine compartments, Sensitive machinery, Computer/Server rooms protection etc.

Mobile trolley units

For protection against larger industrial hazards.

  1. CO2 – Rapid fire control with minimum clean up.
  2. Dry Powder – Highly effective with a fast flame knockdown.
  3. Foam – Suitable for Class A & B fire risks.

FIRE ALARM BELL WITH STROBE LIGHT FOR ALARM SOUND SYSTEM

Fire alarm bell with strobe light for alarm sound system

The Fire bell normally rung to give signals in case of a fire incidence. The alarm will sound notifying everyone about the impeding danger. This is a quality hollow bell that is made of metal that makes a ringing sound when struck.

The 433 MHz Wireless Flash Siren Alarm Siren Horn Red Light Strobe Siren for Home Alarm System Security kit is the most used in Nairobi Kenya.

Overview Integrated with wireless strobe siren and transmitter host, this system can apply to not only a wireless strobe siren, but also an independent alarm host.

When any detector in this FIRE ALARM DETECTION AND ACCESSORIES SYSTEM is triggered, the host will alarm will sound immediately with loud sound as well as warning flashing with exclusive blinding light to deter intruders.

The host detectors are in wireless transmission mode and can be installed easily. With humanized design, user can assign arm, disarm, volume adjustment, emergency and help, etc. by wireless remote control only.

User can configure multiple wireless magnetic door contacts, wireless PIR detectors, wireless smoke detectors, wireless gas detectors, wireless carbon monoxide detectors, wireless vibration detectors, wireless infrared fences, wireless infrared and other accessories in need.  

Item Information

1.Compact and fashionable mushroom-shape design

2.Wireless, DIY

3.Smart and adjustable volume with 8 levels (including mute)

4.110dB super loud siren, 4 groups of flashing light

5.EEPROM information protection, information never lost to ensure information security

6.Wireless intelligent study coding, maximum support 30pcs remote control and 50pcs detector

7.Compatible with PT1527 (150K~470K) and PT2262 normal encoding (Resistance 1.5-4.7M)

8.Built-in Ni-Hi rechargeable battery 3.7V/600mAh, Standby 8 hours above

9.AC/DC, twenty-four-hour ordinary guarding without interruption

10.AC 100~240V 

We have the best Generic 12V 60W 5 Sound Car Warning Alarm Police Fire Siren Horn Loud PA Speaker MIC System in dayari technologies shop Nairobi Kenya.

Product details

  • Features:
    A good replacement for your old fog lamps support brackets.
  • Made of high-quality ABS material, durable.
  • Perfectly fits for Ford Fusion/Mondeo 2013-2015.
    Comes in pairs.

    Key Features
  • 5 siren sounds to meet different purposes.
  • Volume adjustable, can be used as a MIC.
  • Universal fit 12V vehicle (Car, Van, Truck, SUV, Motorcycle, Yacht, Bus, etc.).
  • Easy to install with the screws and a 4-hole mounting base.

The box comes with 12V 60W 5 Sound Car Warning Alarm Police Fire Siren Horn Loud PA Speaker MIC System.

FIRE ALARM DETECTION AND ACCESSORIES SYSTEM Supply and Installation Company in Nairobi Kenya

It is an important consideration to Safeguard your home or business premises, as well as their occupants from being razed down with fire.

This can be done by installing quality and reliable Fire Sirens and Flashers FIRE ALARM DETECTION AND ACCESSORIES SYSTEM from dayari technologies Kenya

The Fire Siren and Flashers makes it particularly easy to alert occupants of a very large and complex building of a fire outbreak, allowing them the opportunity to exit the building in time and to avoid being burned.

This reduces significantly, the number of people who would be trapped in a burning building because the sirens are usually loud and when they go off, everyone knows it’s an emergency situation.

Our Fire Siren and Flashers as well as FIRE ALARM DETECTION AND ACCESSORIES SYSTEM are of a very high quality yet affordable. They are designed to keep your family and business premises occupants safe.

fire alarm bell with strobe light for Alarm Sound System

call us today and buy the fire alarm bell with strobe light for Alarm Sound System at an affordable price in Kenya.

Features

Fire alarm bell& Strobe siren

SR-A82 Fire Siren/Strobe

Voltage: 24VDC

Current: 100mA

Color: RED COLOR

Power: 112db/30cm

Voltage: 15-30V DC

Size:134X115X48mm

Product Pictures

FIRE EXITS SIGNS

Fire exit signs provide clear visual guidance to the nearest exit, which could prove invaluable in an emergency.

We have a large range of fire exit signage to choose from, in a variety of sizes and materials.

Fire Exit Right Signs, Fire Exit Left Signs, Fire Exit down Signs, Fire Exit up Signs, Fire Exit Keep Clear Signs, Fire Escape Signs, Floor Level Signs.

We are the leading Fire Exit Signs shop where you can buy in Nairobi Kenya.

When it comes to complying with health and safety rules using the right signs can have a very important role to play.

We offer a large selection of products, so finding the right one for you might be easier than you think.

Our site safety and security signs are an ideal choice for building sites, warehouses, car parks and many more areas besides.

Vehicle & Parking signs, Security signs, Fork Lift Trucks signs, Machinery signs, Warehouse signs, Construction signs, Men at Work signs.

We are the leading Site Safety & Security Signs branding company in Nairobi, Kenya.

Fire Safety Signage

According to the Law, every workplace is expected to have a clearly labelled emergency exit. The most obvious advantage of fire safety signage to a workplace is that it gives your employees a clear, easy way out in the event of a dangerous situation.

If it’s a fire, for example, exit signs that come with emergency lighting give people a direct route to leave the premise.

There’s no potential for confusion. The signs are visible at all times, meaning employees can work under the knowledge or sense of safety at their workplace.

Opticom has the knowledge and expertise to assess the most effective fire escape route from the premise and from this, provide the most suitable signage for your business.

 Additionally, we provide training on what the signage means so that in the event of an emergency, you and your team are not confused on what to do.

Fire Safety Signs

The Health and Safety (Safety Signs and Signals) Regulations 1996 covers the provision of fire safety signs that are required in the workplace.
These Regulations bring into force the EC Safety Signs Directive 92/58/EEC on the provision and use of safety signs at work.

The safety Signs Directive which was adopted on 24 June 2003, recognized the need for all workplaces to have easily recognizable signs and symbols relating to safety matters and encourage the standardization of safety signs throughout commercial and public facilities so that safety signs, wherever they are seen, have the same meaning.

Safety signs are divided into categories according to the type of message they are intended to convey. Each category is assigned a specific format and set of colors. Detailed specifications such as relative dimensions and the permitted relative proportions of colors are given in BS 5499.

Prohibition Signs

These signs should he used to convey “Do Not” type commands for example, to indicate that smoking is not allowed or where a particular material reacts dangerously with water, “Water should not be used” sign.

In the workplace they should be used to reinforce instructions prohibiting dangerous activities and are required by the Health and Safety (Safety Signs and Signals) Regulations 1996. Such instructions, however, should also form part of the employees training.

Signs prohibiting an activity consist of a circular red band and single diagonal cross bar descending from left to right at an angle of 45 degrees. The background should be white with the pictogram indicating the nature of the command in black.

Warning Signs

These signs should be used to make people aware of a nearby danger. For example, a flammable liquid store or a laboratory where radioactive substances are in use should have an appropriate warning sign near the entrance.

These signs are required by the Health and Safety (Safety Signs and Signals) Regulations 1996 and in specific cases by the Dangerous Substances (Notification and Marking of Sites) Regulations 1990.

Signs warning of a particular hazard consist of a black band in the shape of an equilateral triangle. The background within the band should be yellow with the pictogram indicating the type of hazard in black positioned centrally on the sign.

Mandatory Signs

These signs should he used to indicate actions that must be carried out in order to comply with statutory requirements. For example, an area of a construction site where hard hats should be worn should have appropriate signs at the entry points and self-closing fire doors that must be kept closed, to comply with a fire risk assessment, should be labeled with “FIRE DOOR KEEP SHUT” signs.

It should he noted that the Health and Safety (Safety Signs and Signals) Regulations 1996 do not apply to mandatory fire instructions but do apply to health and safety mandatory signs where pictograms are required.

The minimum requirement is for the sign to include an appropriate pictogram and there are no pictograms for fire safety instruction signs.

Although mandatory in the UK through inclusion in the requirements of most fire risk assessments, such signs are not considered as health and safety signs within these Regulations. Thus, the familiar white on blue fire safety mandatory signs using text only will remain in place and will not have to be changed.

Fire action notices, that is notices which list actions that occupants must carry out in the event of a fire are, by convention, written as white text on a blue background but not in the circular format.

The colors are used to convey the mandatory nature of the instructions but because of the amount of text normally needed a rectangular format is used.

The general mandatory sign of a white exclamation mark on a blue circle may be used in conjunction with a fire instruction notice. Signs indicating mandatory requirements consist of a blue circle with the pictogram or text in white positioned centrally.

Safe Condition Signs

These signs should be used to indicate escape routes, emergency exits, first aid equipment, emergency showers and the like.

 In the same way as for mandatory signs some UK fire safety signs in this category are not required by the Health and Safety (Safety Signs and Signals) Regulations 1996.

For example, “PUSH BAR TO OPEN” is not required to comply and there is no pictogram with that meaning. Such signs are still needed for compliance with fire risk assessment and in some cases the Health and Safety at Work Act 1974.

Safe condition signs consist of a green rectangle or square with the pictogram or text in white positioned centrally.

Supplementary information signs

These are signs used to provide additional information. In the Health and Safety (Safety Signs and Signals) Regulations 1996 these are confined to directional arrows. However, BS 5499 includes various text messages as well as arrows under the description of supplementary signs. To comply with the Regulations where a direction indication is needed the minimum requirement is for a supplementary sign in the form of an arrow.

The supplementary text messages in the British Standard such as “Water as an extinguishing agent prohibited” will be acceptable under the regulations only if accompanied by an appropriate pictogram.

This is entirely consistent with the philosophy of the British Standard. Supplementary signs consist of a square or rectangle in the appropriate color with the pictogram or text in white and positioned centrally.

The color should be green where the information supplements a safe condition sign, red where It supplements a fire equipment sign or yellow to supplement a warning sign.

There is a minor conflict between the British Standard and the regulations on the permitted color of supplementary signs.

BS5499 allows text to be in black on a white background or white on the appropriate color. The color alternative is the only option permitted in the Regulations. Thus, the Regulations can be complied with by adhering to this option in the Standard.

Illumination of signs

Exit signs should be legible at all material times. In premises where emergency lighting has been considered necessary for means of escape purposes such signs should be illuminated by the emergency lighting supply in the event of a failure of the normal lighting.

 Any of the following methods are considered suitable, lamps external to the sign but providing adequate illumination of it, lamps contained within the sign, internally illuminated signs, Self-luminous signs requiring no external power source.

Reference should be made to the following British Standards where appropriate.

B.S. 5499 Safety signs, including fire safety signs. BS EN 60598-2-22:1998+A2:2008 Luminaire’s. Particular requirements. Luminaire’s for emergency lighting

Provision of exit signs

The regulations place a duty on employers to ensure that safety signs are provided in circumstances where the risk to the health and safety of employees, identified through the risk assessment requirement contained with the Management of Health and Safety at Work Regulations 1992 cannot be entirely, engineered or managed out of the workplace.

 It should be noted that the Regulations do not require safety signs to be used where there are no significant risks to the health and safety of employees. The issue which then requires to be resolved is whether it is necessary to indicate exits with signs.

In arriving at a decision, the fundamental issue which will underpin the process is whether the risk of injury or death to employees from a fire within a particular premise is deemed to be significant enough to warrant the provision of signs indicating fire exit routes and final exits.

If it is deemed that the risk is not significant then there is no need to install the signs.

Thus, for example, a small, single story premises with one clearly visible exit should not require

a fire exit sign because it would be obvious to staff that the door is their only means of access/egress and hence there should not be a significant risk to their health and safety from fire by not signing the door as an exit.

However, those buildings with more complex internal layouts incorporating multiple exits, some of which may not be readily visible nor frequently used, or where large numbers of the public congregate, will require fire exit signs, complete with directional arrows where necessary, if there is a significant risk of individuals not being able to find their way to a place of safety in the event of a fire. More information can be found on Fire Exit signs.

Fire Fighting Equipment Signs

These signs are used to mark the location of firefighting equipment and fire alarm activation points. However, where possible, fire equipment should be positioned where it is clearly visible.

The Health and Safety (Safety Signs and Signals) Regulations 1996, require red to be used as the identifying color for firefighting equipment. If the equipment itself is red this will satisfy the requirement.

Where it is not red then highlighting the position of firefighting equipment by coloring background behind the equipment red may be enough to comply. Fire equipment signs consist of a red rectangle or square with the pictogram in white positioned centrally on the sign.

Provision of firefighting equipment signs

The same general process outlined above is applicable to this section. Again, it is assumed that because there is a possibility of a fire occurring in the premises then firefighting equipment will be needed.

Whether this equipment also requires to be identified by means of a sign will depend on the physical environment in which the fire risk assessment takes place.

In other words, the features of the workplace, the activities carried on there and any other circumstances deemed to be pertinent must be taken into account. For example, in a building where the internal layout is such that the extinguishers provided are clearly visible to employees there should not be a requirement to further indicate the position of the firefighting equipment with a sign, or by coloring the background red.

Alternatively, in more complex building layouts, for example where it is not always possible to ensure that fire extinguishers and FIRE ALARM DETECTION AND ACCESSORIES SYSTEM are in the line of sight of employees, for example due to the nature of the work process or where hose reels are installed within cabinets or where firefighting equipment is contained within recessed fire points then it would be pertinent to provide signs indicating the position of the equipment complete with directional arrows where applicable.

It is important to highlight that the process by which a decision is reached regarding the necessity or otherwise of providing firefighting equipment signs should be based on whether a significant risk exists as a consequence of the particular location of such equipment. If it is deemed that a significant risk does not exist then there is no requirement to provide the signs.

Exit Signs

In order to comply with the requirements of the Building Regulations 1991, every doorway or other exit providing access to a means of escape, other than exits in ordinary use, should be provided with an exit sign.

Installation of signs conforming to British Standard 5499 will satisfy both the Building Regulations 1991 and the Health and Safety (Safety Signs and Signals Regulations) 1996.

In general, these Regulations will not require any changes where existing fire safety signs containing symbols that comply with BS 5499.

This is because the signs in BS 5499, although different in detail to those specified in the Regulations, follow the same basic pattern and are therefore considered to comply with the Regulations.

A typical sign in BS5499: These signs usually contain words such as ‘Fire Exit’ as well.

Fire warning and FIRE ALARM DETECTION AND ACCESSORIES SYSTEM

Where evacuation from buildings is needed, the Regulations require the fire alarm signal to be continuous. Fire alarms conforming to BS 5839-1:2017. Fire detection and alarm systems for buildings do not need changing, nor do other acceptable means such as manually operated sounders, e.g. rotary gongs or hand bells.