Biometrics security access control
Biometrics security access control,Biometrics has played an important role in efforts to strengthen airport security globally and Kenya has not been left behind.
At Jomo Kenyatta international Airport Biometrics have been used to implement a cost-effective, user-friendly and secure employee identification system.
Biometrics has played an important role in efforts to strengthen airport security as well as security of major public areas in Kenya.
Following 9/11, the aviation industry faced immediate challenges in identifying and addressing new security issues to make their airports more secure.
In addition to increasing the numbers of security officers by nearly 50 per cent, London City Airport as well as Kenya Jomo Kenyatta airport focused on how to strengthen security using technology, where appropriate.
A system which uses each employee’s unique finger biometric to control access to restricted areas of the airport was chosen.
In two major robberies at Heathrow in 2002, security vans within the airport’s Restricted Zone (RZ) were targeted. Following these robberies, the Metropolitan Police called for a tightening of aviation security.
The police’s view was that it was not possible to distinguish between non-terrorist crime and terrorism, a weakness in one security area showed a weakness in another.
A report for government, commissioned jointly by the Department for Transport (DfT) and the Home Office, was prepared by Sir John Wheeler. Its primary focus was on the role of the police at airports, in respect of aviation security and more widely in airport security.
The report’s many recommendations included improvements in CCTV and bio metrics coverage at airports, tightening of verification procedures at points of access to the RZ and more thorough background checks before staff are issued with an RZ pass.
The Government accepted in principle all of the recommendations of Sir John Wheeler’s report
An area identified for enhancement was the verification of persons seeking to gain access to the Restricted Zone.
Identity management technology needs
In seeking to apply new technology to meet our security requirements, London City Airport identified a number of key requirements in a potential solution:
- Sufficiently mature and reliable
- Acceptable to staff, providing fast and easy access for authorised users
- User-friendly technology
- Seamless integration with existing systems
- Common platform
- Secure and robust system
- Cost efficient
- Biometrics security access control
One technology that showed promise was biometrics. A biometric is a physical or biological feature or attribute that can be measured.
The strength of biometrics lies in the one-to-one relationship between a person and their unique biometric information.
The use of this biometric technology would enable security staff to verify the validity of a claimed identity, answering the question “Is this person who he, or she, claims to be?”
The use of biometrics ensures that individuals can assert only their own identity. This ensures non-repudiable authentication – security staff are assured that they are authenticating the individual – not just an electronic ID card or secret password.
Biometric identification works in four stages: enrolment, storage, acquisition and matching. Individuals are enrolled by creating a record associating the identifying features with the individual.
This record scan is then stored. There are two options for storage: the records can be stored in a central database, or in a decentralised way, for example using smart cards.
Then, when identification is required, a new scan is performed. Finally, the newly acquired record is compared to the stored record. If they match, the individual has been identified.
The London City Airport security team spent nearly twelve months assessing the various biometric technologies available and how these technologies could be applied to meet the key objective, to strengthen airport security.
Once the team had chosen a supplier they worked very closely with them to design a system that would incorporate their Biometric Authentication Engine into the existing airport infrastructure, avoiding the very significant cost of installing entirely new equipment and cabling across a large site.
The biometric authentication system introduced in 2003 now verifies the identity of all airport employees.
The chosen system operates with a range of authentication methods, including fingerprint, iris and facial recognition.
This allows London City Airport to decide on the level of authentication required in order to gain access to the restricted zone.
There are many different types of biometric recording and checking systems available, some of which can be applied on a large scale and others which are more specialized.
For an access control system, any chosen biometric should be widely applicable to the whole airport workforce, use technology which is proven and affordable, and – most important of all – be acceptable to the staff.
Four types of biometric information were considered for use in the access control system: fingerprints, iris patterns, facial recognition and hand geometry. All four have been used in pilot programmers at other airports.
At London City Airport, we came to the conclusion that a system based on fingerprints, which are the most widely used form of biometric recognition, would best suit our particular application.
However, we also decided to choose a system which can be configured with any of the biometric technologies, as the airport may well deploy one or more of these other technologies in the future.
In selecting fingerprints as the initial biometric technology, the airport also considered the type of card to be utilized in the process.
Our view was that storing the fingerprint data on the central server offered a more effective and reliable solution, utilizing existing passes and much of the gate equipment, as well as providing the additional security of keeping the biometric data separate from the identity card.
The installation consists of new proximity card readers at the entry points to the Restricted Zone in the Terminal, the Vehicle Control Post, the entry to the Jet Centre and access to the airport administration building, City Aviation House.
The new card readers incorporate a Biometric fingerprint reader. The Biometric reader is used to authenticate the user of the Identity (ID) pass.
In order to access airside, all eligible employees are required to enroll their fingerprint template onto a biometric database, held separately to the existing Security ID pass database.
Prior to enrolment, each staff member is given a form outlining how the bio-metrics system operates, and how the data is held. Each person signs to confirm acceptance. A list of ‘Frequently Asked Questions’ is issued to all employees before they enroll.
Security Enrolment staff take four separate finger templates from each employee, to allow flexibility when access is required.
This enrolment process took place during the weeks leading up to the cutover, with each organization being allocated time slots for their staff to attend the ID unit.
Enrolment took three to five minutes per person. Organizations requiring access to the Restricted Zone range from airlines and handling agent’s staff, to cleaners, maintenance technicians and retail and catering staff.
The ability to match fingerprints depends crucially on the quality of the original fingerprint taken. Enrolment staff needs to be trained to ensure that fingerprints are properly scanned.
Initially some problems were experienced with the quality of the enrolment data, and many of the staff enrolled at the beginning of the process have returned for rescanning.
As the ID Room staff gained experience, so the quality of data recorded improved.
One of the first software modifications introduced was to provide feedback on the quality of the enrolment.
The enrolled template is valid for the period of the pass, up to three years, as over time, a user’s biometric information may change.
To date, there have been no failures of the system – we haven’t let in anyone we shouldn’t. Where members of staff have experienced problems gaining access, it has been due to poor enrolment data, or failure to present a finger properly.
To ensure that no unauthorized changes are made to the central database, electronic signatures are used to ensure data integrity. Each transaction requires the enrolling officer to confirm their own identity through the biometric scanner.
Representatives from all airport companies and organizations were invited to meetings prior to the commencement of the enrolment process, where the biometric security access control project was discussed in some depth.
One of the key questions raised by staff was the security of the information being captured, specifically the fingerprint.
With the system installed at London City, once the fingerprint has been scanned, it is converted into a series of numbers, which are then encrypted through various layers before being recorded in the biometric database.
There is no record of the fingerprint image kept on the biometric security system; the image cannot be recreated from the encrypted numbers, and cannot be seen as a picture on a screen or anywhere else.
This consultative process, involving staff, their management and their trade union representatives, resulted in 100% voluntary enrolment amongst London City employees, and staff of other companies working at the airport.
Access to the biometric database information is restricted to nominated personnel within the London City Security department and the London City IT department (for maintenance). The database is installed at the airport and is not accessible from any other network.
The only information stored on the bio-metric database is the employee’s name, ID pass number and fingerprint template.
Other key personal data is stored on the Security Department master database. It is not possible to recreate the template creation process to reconstruct the original fingerprint image, or to modify the template at a later date.
London City Airport is required to ensure that the biometric database and the Security ID pass database operate in accordance with the principles set out in the UK Data Protection Act 1998.
The Act distinguishes between personal data and sensitive personal data, and sets tighter conditions for processing the latter.
The Code of Practice for the system includes what the information is used for and to whom it might potentially be made available.
A copy of the Code of Practice is issued to each organization, and may be viewed by any member of staff at the ID Pass Office during normal working hours.
Our bio-metric system is a “closed” application; it does not exchange information with other biometric systems or organizations. Specifically, it is not linked to police or government databases, although such linkages are possible if legislation were to change.
Security is a vital part of the airport’s operation and the security team continues to look at new technical enhancements to assist in preventing unauthorized access to the airport and aircraft, to ensure the safety and security of passengers and staff.
The security team intends to develop the existing identity management infrastructure to:
- Introduce biometric logon for all desktop systems in the airport
- Integrate common use platforms in the airport including check-in systems, X-ray screening machines.
The UK Department for Transport is currently monitoring trials of biometric systems at a number of airports, and has approved the installation at LCY.
What benefits has the biometric system delivered to London City Airport?
Increased security controlling access to the Restricted Zone at the airport
Reduced risk of identity fraud
Enhanced user confidence in our security systems
Eliminated the possibility of fraudulent use of lost or stolen ID cards
Consistent security across all RZ entry points.
Related Biometrics resources